Music Ministries at Asbury

Great:

Remove all pipes to storage for cleaning
Pack trumpet for shipping
Pack Quintade for shipping, make rubbing of 61 note action
Remove all chest actions, pack for shipping
Remove all wind system parts for releathering
Clean windchest, replace gaskets as required
Remove Zimbel toeboard for shipping
Install new felt in mufflers
Install new felt on Rohrflute caps
Install new cabling on all magnet contact strips
Install all new and rebuilt parts and pipes, regulate actions and tune

Swell:

Remove all pipes to storage for cleaning
Clean chest and swell enclosure, vacuum grille cloth, replace gaskets as needed
Pack Oboe for shipping
Pack Erzahlers for shipping
Pack Vox Humana for shipping
Make rubbing of 2’ and Zimbel actions
Pack Sesquialtera toeboard for shipping
Remove all chest actions, pack for shipping
Remove schwimmers, pack for shipping
Install new felt in mufflers
Pack Moller Trumpet 85 pipes for shipping, note wind pressure
Releather Moller Trumpet chest actions and reservoir
Remove expression engine and all shades, pack for shipping
Install new felt on Lieblichflute caps
Install new cabling on all magnet contact strips
Replace all flexible joints and flex hose windlines
Install all new and rebuilt parts and pipes, regulate actions and tune
Relocate Walker Speakers in Swell enclosure
Relocate existing Moller trumpet chests and winding
Install new Casavant supplied wind chest and winding

Positive:

Remove all pipes to storage for cleaning
Remove all chest actions, pack for shipping
Releather schwimmer and wind system parts
Clean chest, replace gaskets as needed
Make rubbing of Krummhorn actions
Fit former Swell Sesquialtera on Positif chest, 2-2/3’ on 2’ Principal slot and 1-3/5’ on 1’ slot
Inspect crack in wind chest and repair if possible or ship to Casavant for repair
Install new felt on Gedeckt and Koppelflute caps
Install new cabling on magnet contact strips
Install all new and rebuilt parts and pipes, regulate actions and tune

Pedal:

Remove all pipes to storage for cleaning
Pack 16’ Principal and all reeds for shipping
Make rubbing of 4’ Schalmei action
Remove all chest actions, pack for shipping
Pack all schwimmers for shipping
Releather regulators and wind system parts
Install new felt in mufflers
Releather Subbass stoppers
Replace felt on Pommer caps
Releather Moller 32’ Bourdon, 32’ Bombarde chest actions and wind regulators
Re-enforce racking to hold pipes straight
Install new cabling on magnet contact strips
Install all new and rebuilt parts and pipes, regulate actions and tune

Console:

Remove to Baltimore workshop
Strip, refinish case work
Provide 83 new magnet-repulsion draw stop solenoids in existing stop jambs
Provide 21 magnetic-repulsion tilting coupler tablets in existing coupler board
Install new 4 manual keyboards, ivory resin naturals with ebony sharps, with piston rails
Install new 32 note pedal board
Install new suitable SSS Capture System and provide all power supplies and wiring in console
Provide new bolsters for toe studs
Refinish bench and music rack
Return to church, install, test, regulate
Provide new solid-State Capture Combination action
128 levels of memory with digital selector
12 generals on Thumb and Toe
8 Divisionals on each of 5 division
Programmable crescendo with digital display
Reversible pistons
SFZ w/indicator light, Zimbelstern, 32’ Untersatz, Solo/Ped, Sw/Ped, Gt./Ped, Pos/Ped, Sw/Pos, Pos/Sw, Solo/Gt
Set, General Cancel
Provide new solid-state Multi-System for distribution of electricity throughout the organ incompliance with National Electrical Code
Provide two new power supplies for the organ and console
Provide connection points for the installation of the Schulmerich Carillon
Provide MIDI connections for record/playback system

Blower:

Remove old blower and discard, releather static regulator, install new blower provided by Casavant

Asbury to provide all dedicated AC power connections for power supplies in console, organ chamber and blower and will remove AC wiring attached to organ chests and provide new fluorescent lighting in Swell box and under Great chest. The church is to provide electrical disconnections for old blower and connections for the new blower.

Great:

The Quintade 16’ shall be rescaled by one pipe and revoiced as a Bordon 16’. New toeboards and stays shall be provided. The canisters shall be refelted.
A new Tierce 1-3/5’, 61 pipes with toeboard shall be installed in place of the Cymbel IV.
The Trompete 8’ shall be repaired as needed and revoiced with new shallots and tongues in order to achieve chorus reed qualities. The tuning scrolls shall be retained.

Swell:

A new 5-stop pitman windchest with primaries and schwimmer shall be provided for the existing Erzahler 8’, Erzahler Celeste 8’, and Vox Humana 8’ along with new Principal 4’ and Sharp Mixture III (1’). Walker speakers to be relocated.
The new windchest shall be provided with unit action for the Erzahler 8’ and Erzahler Celeste 8’. The Erzahler 8’ shall be re-mitered as needed and provided with new stays.
A new Principal 4’, 61 pipes shall be provided.
The existing Principal 2’ shall be relocated on a new toeboard on the Sesquialtera II action.
A new Grave Mixture III 2’, 183 pipes with toeboard shall be installed in place of the Sesquialtera II and Principal 1’
A new Sharp Mixture III 1’, 183 pipes with toeboard shall be provided.
The existing Oboe 8’ shall be repaired as needed and revoiced with new tongues in the Builder’s workshops.
The existing Vox Humana 8’ shall be repaired as needed and revoiced with new tongues in the Builder’s workshops.

Positiv:

A new Cromorne 8’, 61 pipes with toeboard and stays shall be installed in place of the Krummhorn 8’.

Solo:

The existing Bombarde 16’-8’-4’ (by Moller) shall be repaired as needed and revoiced with new tongues in the Builder’s workshops.

Pedal:

The existing Posuane 16’ shall be repaired as needed and revoiced with new shallots and tongues in the Builder’s workshops.
The existing Trompette 8’ shall be repaired as needed and revoiced with new shallots and tongues in the Builder’s workshops
A new Clairon 4’, 32 pipes with toeboard and stays shall be installed in place of the Schalmei 4’

Other:

The exposed zinc pipes shall be relacquered in the Builder’s workshop.

Windchests and Accessories:

The existing Casavant windchests (pouchboards, primaries, stop actions, and offset actions) shall be releathered.
Two new tremulants shall be provided.
A new blower contained in a sound-absorbing enclosure that may be disassembled, along with a static reservoir, shall be provided for the entire organ.
In order to assure wind stability to the enlarged Swell and Pedal divisions, the existing main Swell and Pedal windchests shall be provided with new schwimmers. The schwimmer box shall be replaced with a new reservoir.
A new reservoir and windtrunks shall be provided for the Pedal Subbass 16’, Bordun 16’, and Octav8’ offset notes.

Expression:

The original Casavant 16-stage expression motor shall be rebuilt in the Builder’s workshop.
The expression shutters shall be rebuilt with neoprene gaskets for greater effectiveness.
Necessary expression linkage, etc. shall be provided to reconnect the original expression shades to the motor.

Tonal Work:

Once re-installation is completed, two Casavant voicers shall tonal finish the new stops, re-regulate the existing stops, correct voicing irregularities and tune the organ. A maximum period of twelve days is included for tonal work.

Projected Schedule:

Removal of organ by David M. Storey, Inc. after Easter 2009 and appropriate parts shipped to the Baltimore or St. Hyacinthe factories.
New and refurbished parts ready for shipment back to Asbury Church, September 2009
Reinstallation on site in October 2009
Tonal work on site in November 2009